flame temperature造句

• The flame temperature is lower, thus giving a longer barrel life .
  火焰温度较低，因而可使炮管寿命较长。
• Flame temperature measurements can be used as a guide in discussing energetics of a homogeneous propellant .
  火焰温度的测定可作为讨论均质推进剂能量特性的指导。
• Oxyhydrogen flame temperature controller
  氢氧焰温度控制器
• Aft adiabatic flame temperature
  绝热火焰温度
• Flame temperature detector
  火焰温度检测器
• Adiabatic flame temperature
  绝热火焰温度
• Peak flame temperature
  最高燃烧温度
• Tests for electric cables under fire conditions - circuit integrity - part 11 : apparatus - fire alone at a flame temperature of at least 750 c
  着火条件下电缆的试验.在至少750摄氏度下火焰中设备线路完整性
• Its unique design with a wide range of flame temperatures makes it ideal for a large variety of on ratio and excess air operations
  大范围火焰温度的独特设计使得该产品是一款多种比例和过量空气燃烧的理想元件。
• The reconstruction algorithm plays a key role in reconstructing acoustically the flame temperature field in coal - burning boiler hearth
  摘要在声学法燃煤锅炉炉膛火焰温度场重建中，重建算法是实现温度场重建的关键。
• Its unique design with a wide range of flame temperatures makes it ideal for a large variety of on ratio and excess air operations
  大范围火焰温度的独特设计使得该产品是一款多种空燃比例和过量空气燃烧的理想燃烧器。
• Flame temperature field measurement plays an important role in burning process control , production safety and environment protection
  这对于提高产品质量、优化燃烧过程、节约能源、保护环境以及工业生产安全都有重要意义。
• Mathematical model is constructed in order to explain the physical mechanism of flame temperature detection in boiler using ccd camera directly
  建立测温数学模型，为直接利用ccd摄像机检测锅炉炉膛燃烧火焰温度阐明了物理机理。
• Tests for electric cables under fire conditions - circuit integrity - part 11 : apparatus - fire alone at a flame temperature of at least 750 c
  在火焰条件下电缆或光缆的线路完整性试验第11部分:试验装置火焰温度不低于750 c的单独供火
• Experiments based on this algorithm were done on the experimental setup we developed for the reconstruction of actual flash flame temperature field
  用该算法结合所研制的实验系统对实际燃烧火焰温度场进行了重建实验，给出了实验结果。
• Higher than 800c in flame temperature , under the condition that the ideal burns the state and has sufficient oxygen , only the carbon dioxide and steam are released while burning
  在火苗温度高于800c ，理想燃烧状况并有充足氧气的条件下，燃烧时只有二氧化碳和水蒸汽释放。
• As to large - scale coal - fired boiler of power station , controlling the flame temperature in the stove are very important for the dependability , security and economy operated to the boiler
  对大型燃煤电站锅炉而言,监控炉内火焰温度,对锅炉运行的可靠性、安全性和经济性非常重要。
• The intensity of up to four spectral lines can be simultaneously measured . the flame temperature distribution in the axial direction of solid propellants is measured using the spectroscopic diagnostic system
  利用建立的光学诊断系统对sq - 2推进剂以及丁羟推进剂的燃烧火焰的轴线上的温度分布进行了研究。
• We obtained the formula between the flame temperature and ccd image , analyzed the errors in the formula ; 3 . we designed and made a flame temperature measurement system based on the color ccd image
  根据ccd器件、几何光学、辐射测温机理、火焰的灰体假设，得出火焰温度与ccd输出图像之间的关系式，对影响关系式的各种因素进行了分析； 3
• So , the accurate measurement and forecasting of flame temperature field in the stove is very important for the burning state judgement , and adjust the operation parameter of the boiler in view of the above , it is very important to ensure the normal running of the boiler
  因此,炉内火焰温度场的准确测量和预估对判断炉膛的燃烧状态,并据此调整锅炉的运行参数,保障锅炉的正常运行非常重要。